Before & After Photos

This home in Elkton, MD, had some areas of cracks where groundwater was entering the home at two different points. Our team went out to assess the cracks and applied our FlexiSpan System to both points, then we placed a foam-lined channel that redirects the water down into the sub-floor drainage system. We injected each crack with Urethane that permanently stops water leakage coming in through the basement and won't leak or even reopen over time.  

At this property in Elkton, MD, the homeowner was having their sump pump shut off during storms. We installed our UltraSump Battery Backup system that ties into the sump pump. This system will turn on if water rises above a certain point. It will remove up to 12,000 gallons of water on a fully-charged battery, keeping the basement of the home safe during power outages.

This Elkton, MD, homeowner had been dealing with persistent water seepage in their basement for months, leading to the growth of iron ochre on the walls and floors. Despite their best efforts to manage the issue, the problem only worsened, leaving them frustrated and worried about potential long-term structural damage.

After reaching out to Quality 1st, our expert team quickly assessed the situation and recommended a comprehensive solution. We installed our patented WaterGuard Drainage System to direct water away from the foundation, CleanSpace Wall Panels to prevent further moisture intrusion, and our TripleSafe Sump Pump to effectively remove any collected water.

With these advanced solutions in place, the homeowner’s basement was restored to a dry, healthy condition, free from water seepage and the damaging effects of iron ochre.

This Elkton, MD, homeowner had been increasingly concerned about ongoing water seepage in their basement, which had been causing damp conditions, musty odors, and a growing risk of mold. After several unsuccessful attempts to address the issue on their own, they reached out to Quality 1st for a long-term solution.

Our team installed our patented WaterGuard Drainage System along the perimeter of the basement floor to efficiently collect and redirect water away from the foundation, preventing further seepage. To protect the walls, we added CleanSpace Wall Panels, which created an airtight seal and reduced moisture vapor infiltration. Finally, we installed our SuperSump Premier Sump Pump to quickly remove any water that entered the space, ensuring the basement remained dry, healthy, and protected.

With these systems in place, the homeowner’s basement was fully restored to a clean, dry, and inviting space, free from the worries of water damage!

This homeowner in Elkton, MD was noticing cracks in the unfinished portion of their basement. The crack was leaking in water during heavy rains. They called Quality 1st for a free estimate and inspection. System Design Specialist, Tim Shlegel, recommended Flexispan to seal the crack. Cracks like these allow groundwater to seep into your basement. The Flexispan moves along with the natural movement of the foundation and never cracks so your basement stays protected.