Before & After Photos

Due to soil movement, concrete can settle and unfortunately, turn into a tripping hazard real quick. The biggest tripping hazard we see is where the concrete slab ends and the front door begins. But luckily it's fixable. For this project, the front patio was sinking a few inches and we were able to lift it back to its original position using PolyLevel. Good as new, and most importantly, much safer!

This homeowner in Lincoln, NE was having an issue with a bump leading into the front of their garage. The concrete had begun to become unlevel creating an annoying bump this customer would hit each time going into their driveway. Wanting this issue solved they decided to call Thrasher to come out and take a look at the concrete. 

After looking at the driveway our crew found the concrete had started to settle due to drying out, causing the big lip on the garage slab. The team decided to use PolyLevel loam to fill the voids, and NexusPro joint sealant to seal the joints and protect the concrete slabs. PolyLevel foam fill voids from the drying out, giving the concrete more support and bringing the slab back level. The NexusPro then seals the joints protecting the concrete from weather conditions and giving the driveway a cleaner look while helping keep the slabs protected. 

After the job was completed, this customer now no longer has a bump to drive over and can use their garage and driveway safely without worrying about further damages. 

Take a look at this before and after! This homeowner was experiencing some settling near his garage and new he needed to get this issue resolved. Not only was it a eyesore, but over time would cause more issues to his concrete, garage, and potentially foundation. Thrasher came out for a free inspection and same day quote and System Design Specialist, Caleb Spradlin, came out to help. Caleb found the concrete was starting to sink due to the dried out soil from the very dry year we have had. He proposed we use PolyLevel to lift and level the concrete into place and NexusPro to seal the joints and gaps. Both of these products are waterproof and will help protect water from getting under the slab and washing away any more soil. There is no doubt this homeowner has the peace of mind he needs for his driveway. 

Get new-looking concrete without the hassle of concrete replacement by using our lift and level product, PolyLevel. Sinking, uneven concrete happens when the soil beneath the slab shrinks. PolyLevel is a foam that's injected underneath and lifts the concrete back to its position.

These homeowners originally called us out to look at cracking they had in the basement floor It was not problematic, but through the rest of the inspection System Design Specialist, Coley O'Halloran, discovered signs of street creep pushing on their foundation walls. The already had foundation issues caused by street creep, so when they found their new expansion joint had failed they knew it was something they needed to fix. Coley proposed we use our CompressionGuard to help this issue. It creates a true buffer from concrete expansion, giving long lasting results of foundation and concrete protection. To fix the issue of the cracking and sinking of the concrete from street creep, Coley proposed our Concrete Protection System. This bundles our Polylevel foam to fill voids underneath slabs and NexusPro which seals up all the joints and cracks. The homeowners loved this solution, and we sent out our installation team. There is no doubt these homeowners have the peace of mind they were looking for. Check out of the before and after of this project attached!