Before & After Photos

This homeowner wanted to maintain his driveway and extend the concrete's life to prevent having to replace it down the road. The area where the driveway meets the garage door was noticeably settling a few inches, which created a little speed bump. When we inspected the concrete, we realized there were voids underneath the slab into which the concrete was sinking. The best way to fix this was to use our PolyLevel foam. PolyLevel is an expansive foam that we inject beneath the slab. Once injected, it expands and then hardens to fill all voids. Once it hardens, it's able to lift the slab back to its original position. We also did a little crack repair with our NexusPro crack sealant.

The customer notice their floors were squeeking and wanted to have them inspected. We come out to their home and found that there were issues with the foundation supports in the crawl space. The problem the house was having was the floor support that was there was not enough to support the floor. Now the floor is sagging 3/4" and there are drywall cracks appearing. We fixed the problem by adding Smart jacks to the crawlspace to help support the load of the floor.

If bowing walls are caught early enough, we can stop them in their tracks with a material that feels as light as a feather in your hand!

For this lucky customer, we did just that! Carbon Fiber Wall Straps are up to 10x stronger than steel, unobtrusive, and easy to work around when finishing your home! 

This homeowner had serious problems with their foundation walls rotting which affected the structure of their house. Many people and contractors often just try to fix the wood rot without dealing with the main issue. In this case, too much moisture and humidity caused mold to grow and the wood to deteriorate.  We used a combination of sealing and dehumidifying methods to control the moisture. Our team installed a vapor barrier in the crawl space and a self-draining dehumidifier to remove extra moisture and prevent damage in the future.

This customer had a dirt crawlspace that was causing problems like moisture, cold air, warm air, and bugs getting into their home. To fix this, we used CleanSpace encapsulation and drainage matting. The CleanSpace was attached to the walls with special wall anchors to keep out moisture and other things from outside. It was also installed on the dirt floor to stop moisture from the soil and groundwater. The drainage matting helped with the waterproofing too. We suggested installing a sump pump or smart drain to remove any water that might come in. With the combination of smart drains, drainage matting, CleanSpace, and sump pumps, the homeowner now has a protected and safe crawlspace that can be used for storage without worry.