Before & After Photos

With summer 2013 approaching this homeowner in Englishtown decided to do something about the sunken and settled concrete slabs around his pool. The trip hazards were not safe for his small children. So Foundation Supportworks of New Jersey was able to remedy the problem with the PolyLEVEL Polyurethane Injection System. Drilling penny sized holes in the concrete and injected foam was able to lift the sunken concrete up a total of 5 inches.

Manalapan, NJ homeowner noticed the first level of his home was slightly uneven. The cinder blocks in the basement were expanding and moving inward. System Design Specialist, Ken Peare recommended The PowerBrace Wall Repair System, which will stabilize any failing foundation that is tilting inwards or buckling. The adjustable steel beams are secured to the joists above the wall.Overtime, with proper adjustments, the brace will raise the wall back to its original state.

Have you observed any bowing or horizontal cracks in your foundation walls? These may indicate that your home is not receiving adequate support from the foundation, which could lead to further weakening over time. This was the situation for a residence in Manalapan, NJ, where we implemented a foundation support system. We used our CarbonArmor Straps to provide a permanent solution for the compromised foundation. CarbonArmor is a flexible carbon fiber strap that is securely bonded to walls using a robust epoxy resin, ensuring a permanent installation. With this solution in place, the home will maintain the necessary support from its foundation.  

System Design Specialist: Dane  

Foreman: Wilver

Looking to buy a new house, a prospective Fairfeld homeowner was told by her inspector that the property had weak footing. Concerned about her basement walls bowing and damaging the rest of the house, she called Quality 1st Basement Systems to fix her basement walls. The CarbonArmor reinforcement system is a low-profile repair solution to cracked and bowing basement walls. CarbonArmor is installed from the inside of the home with high-strength epoxy resin that absorbs pressure from the wall. After installation, CarbonArmor can be concealed with a coat of paint, so it is the perfect solution to homeowners concerned about their basement appearance. Now this home is safe for purchase and has strengthened walls that will last.

After a homeowner began noticing the floors on their first floor were sagging they contacted their local experts, Quality 1st Basement Systems to get an estimate on sagging floor repair. We sent Foundation Specialist, Jack Huber, out to inspect the floors and the basement beams to ensure there was enough support. 

Upon inspection he realized the sagging floors were due to lack of support to the basement beams and floor joist. He recommended our SmartJack Stabilizer System to provide the support the beams needed. Each SmartJack is installed underneath the sagging beam and properly adjusted to allow gradual movement back towards its original position.