Before & After Photos

Jean is a homeowner in Springfield, MO that was struggling with her concrete. She previously had the area mud jacked but, it started to settle again. Looking for a long-term solution, System Design Specialist Nick Rosenthal went out to her home, three sections of the driveway sank. We started with installing a CompressionGuard that would help give the driveway room for expansion. Then the crew used PolyLevel to raise the slabs back up to level, sealed the joints with NexusPro Joint Sealant, and sealed the surface with SealantPro. 

This homeowner was concerned about her cracked concrete because it was a tripping hazard. Using PolyLevel expanding foam we were able to lift and level the settled areas of the concrete. Now this sidewalk is no longer a tripping hazard. 

This homeowner has lived in his house for many years. He noticed that the concrete on his driveway had started to crack and flake, however he wanted to maintain it for as long as he decides to live there. He had about our services from his friend, so he gave us a call to see how we could help him.

We sent System Design Specialist Nick Tiberghien to inspect this homeowner's concrete and determine a comprehensive solution to fix the concrete problems. Nick found that due to a lack of control joints for expansion and shrinking, the concrete slabs ran into each other and started to crack. The pitting and flaking on the concrete was another result of the concrete expansion. Nick talked to the homeowner about options to fix this, so he had one of our teams come out and power wash the driveway so that they could begin repairs on a clean surface. The team utilized SealantPro to protect the concrete's surface from further damage from pitting and flaking, then they used NexusPro to seal the cracks and joints of the concrete from expanding further.

The homeowner is so happy that his driveway was fixed and he thinks it looks great. Check out his sealed and protected concrete!

The customer's concrete driveway was settling more than 3 inches next to the house and caused a lot of issues both functionally and aesthetically. The failing concrete was causing the brick facade to begin falling. 

To fix this, we used PolyLevel to lift and level the concrete the full 3 inches, enough to put the facade back in place. This was then followed by Nexus pro to seal the joints and concrete for additional protection. 

After this customer's concrete repair work, we got down to the source of the problem. Water from this exposed downspout was pooling up near the concrete and home's foundation. We buried the downspout to better move rain water away from the home.