Before & After Photos

This whole slab of concrete of a Sherrard, IL driveway had become completely uneven. The PolyLevel system changed that right around and made the slab even again by lifting it back up.

Rick was noticing some issues with his driveway sinking, causing the entrance into the garage to be rough. He reached out to MidAmerica Basement Systems to have his driveway mudjacked. Instead of mudjacking, he was offered PolyLevel. PolyLevel uses similar techniques to mudjacking, but with more affective and longer-lasting results. Small 3/8^th inch holes are drilled to inject the high-density polymers. Once injected, voids become filled, and then expand to lift and level the concrete. The once 2-inch drop, is now level again with PolyLevel.

Homeowners John and Kathy contacted MidAmerica Basement Systems when they were having water issue in the basement of their home. When the waterproofing crew began the work on their home they discovered that the floor of their home had a very large void under it. To make sure that the waterproofing was successful they needed to have the void filled with PolyLevel foam to make sure that the floor was stable enough to handle the waterproofing project. Small ports are injected into the slab and then the foam is pumped under the slab.

In Maquoketa, IA, a homeowner noticed their sidewalk settling slightly, concerned about worsening damage. The before photo captures the uneven look they wanted to improve. We used our PolyLevel system to carefully lift and level the concrete slabs, followed by NexusPro joint sealant to secure the joints and prevent further water infiltration. For lasting protection, SealantPro was applied, guarding the surface against weather and chemical effects. The after photo illustrates the difference we make by prioritizing homeowner satisfaction with proven expertise and reliable solutions. Experience the enduring quality MidAmerica Basement Systems is known for. 

In Delmar, IA, a homeowner called us with concerns about the city sidewalk in front of their home. Over time, the concrete had begun to settle, creating an uneven surface which became a tripping hazard. Using our PolyLevel system, we addressed the issue by carefully injecting a high-strength polyurethane foam through pea-sized holes, stabilizing and raising the slab to its original position. To protect against future complications, we sealed all cracks and joints with NexusPro Joint Sealant. Notice in the after photo how everything looks smooth and secure, providing a safe walkway once again.